As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links (Amazon and other retailers), and we may earn a commission at no extra cost to you if you buy through them.
Your arms don’t need a cable station or a preacher curl machine. A weight bench and a set of dumbbells cover every important angle for the biceps and triceps: stretched positions, supported positions that stop you from swinging, and heavier pressing for the triceps. This guide covers nine weight bench exercises for arms, with step-by-step form cues for each, how to set the bench, two ready-made arm routines, and the mistakes that usually hold arm growth back.
If you want the bigger picture first, our full-body weight bench workout puts the bench to work for every muscle group. This page zooms in on the arms.
Why Use a Bench for Arm Training?
Most arm exercises can be done standing, so what does the bench add? Three things:
- Angles. An adjustable backrest lets you curl with your arms behind your body (incline curls) or in front of it (spider and preacher-style curls). Each position changes where the biceps work hardest.
- Support. Lying or sitting with your torso supported takes the hips and lower back out of the movement. That makes it much harder to cheat a curl with momentum.
- Heavier triceps work. Lying extensions and close-grip presses let the triceps handle more weight than kickbacks or pushdowns, and they need a stable surface to do safely.
The biceps have two heads (long and short), and the triceps have three (long, lateral and medial). You don’t need to target each head individually, but mixing a stretched-position exercise with a supported or shortened-position exercise for each muscle is a simple way to train them more completely. For a deeper look at one part of the triceps, see our guide to short head triceps exercises.
What You Need

A flat bench handles six of the nine exercises. The other three (incline curl, spider curl and the bench preacher curl) need a backrest that inclines. If you only have a flat bench, each of those has a flat-bench swap listed below. Our flat vs adjustable weight bench guide explains the trade-offs if you’re deciding which to buy. For specific models, see our best budget weight benches roundup.
In my garage I have a Marcy Flat Utility bench that I’ve owned since 2018 and a Fitness Reality 2000 adjustable bench. If you need either one, here are the Marcy Flat Utility Weight Bench (paid link) and the Fitness Reality 2000 Super Max XL adjustable bench (paid link) on Amazon. The Fitness Reality listing shows a 7-position backrest that runs from a slight decline up to nearly upright, which covers every angle on this page.
For dumbbells, adjustable sets save a lot of space. I use Bowflex SelectTech 552s; Amazon now lists a newer version, the BowFlex Results Series SelectTech Dumbbells (paid link), which adjust from 5 to 52.5 pounds per dumbbell. Arm exercises use lighter weights than presses or rows, so the small jumps at the light end of a dial-type set are useful here. Our Bowflex SelectTech 552 review covers how they work.
Biceps Exercises With a Weight Bench

1. Incline Dumbbell Curl
Bench setting: backrest at about 45 to 60 degrees. Flat-bench swap: seated curl on the end of a flat bench with your arms hanging straight down.
- Sit back with your head and upper back on the pad and let your arms hang straight down, palms facing forward.
- Keep your upper arms pointing at the floor and curl the dumbbells up without letting your elbows drift forward.
- Squeeze at the top, then lower slowly until your elbows are fully straight again.
- Start lighter than your standing curl. Because your arms start behind your body, the biceps are stretched at the bottom and the same weight feels much heavier.
The lower the backrest, the bigger the stretch. If you feel it in the front of your shoulders, raise the backrest a notch.
2. Spider Curl (Chest-Supported Curl)
Bench setting: backrest at about 30 to 45 degrees. Flat-bench swap: lie face down on a flat bench with your arms hanging over the end (a “prone curl”).
- Lie face down on the incline with your chest on the pad and your arms hanging straight down in front of the bench.
- Curl the dumbbells up, keeping your upper arms vertical.
- Squeeze hard at the top, which is where this exercise is toughest, then lower under control.
Spider curls are the opposite of incline curls: they’re hardest at the top and easy at the bottom. Using both covers the whole range of the movement.
3. Bench Preacher Curl
Bench setting: backrest at a steep incline, standing or kneeling behind it. Flat-bench swap: concentration curl (exercise 4).
- Stand or kneel behind an adjustable bench set nearly upright, and drape the back of your upper arm over the top of the backrest. Use a folded towel if the edge digs in.
- Hold one dumbbell with your palm up and curl it toward your shoulder, keeping the back of your arm on the pad.
- Lower slowly, stopping just short of locking out hard at the bottom. That fully stretched position is where people tend to tweak an elbow by dropping the weight.
It’s a homemade version of the preacher bench. We compare it with standing curls in our preacher curls vs bicep curls guide.
4. Seated Concentration Curl
Bench setting: flat.
- Sit on the end of the bench with your feet wide. Brace the back of your working arm against the inside of the same-side thigh, just above the knee.
- Curl the dumbbell up toward your shoulder, turning your pinky slightly up at the top.
- Lower all the way down. Don’t let your torso rock to help the weight up.
Do all reps on one arm, then switch. Start with your weaker arm and match its reps on the other side.
Triceps Exercises With a Weight Bench

5. Dumbbell Lying Triceps Extension (Skull Crusher)
Bench setting: flat, or a low incline to shift more work to the long head.
- Lie on the bench holding two dumbbells over your chest with your palms facing each other (a neutral grip is easier on the elbows than palms forward).
- Tilt your upper arms back slightly toward your head and keep them there for the whole set.
- Bend only at the elbows and lower the dumbbells beside your head, not onto your forehead.
- Straighten your arms back to the start without letting your elbows flare out wide.
If your elbows complain, shorten the range a little or go lighter and do more reps. Elbow discomfort with this exercise often means the load is too heavy.
6. Close-Grip Dumbbell Press
Bench setting: flat.
- Lie on the bench holding two dumbbells over your chest with palms facing each other and the dumbbells touching or a few inches apart.
- Lower them to your lower chest with your elbows tucked close to your sides.
- Press straight up, keeping the dumbbells close together. Some lifters press the dumbbells into each other the whole set (a “crush press”) for extra tension.
This is the heaviest triceps exercise on the list, so it works well as your first triceps movement. If you also have a barbell, our guide on how to do the close-grip bench press covers the barbell version.
7. Seated Overhead Dumbbell Extension
Bench setting: backrest upright, or sit on the end of a flat bench and brace your core.
- Sit tall with your back against the pad. Hold one dumbbell with both hands under the top plate and press it overhead.
- Keep your upper arms close to your head and lower the dumbbell behind your head by bending your elbows.
- Go as deep as your shoulders comfortably allow, then extend back up.
Overhead work stretches the long head of the triceps, which crosses the shoulder joint. Sitting also helps under a low ceiling. My garage has an 8-foot ceiling, so seated overhead work is a better fit than standing for taller lifters.
8. Bench-Supported Dumbbell Kickback

Bench setting: flat.
- Put one knee and the same-side hand on the bench, back flat, other foot on the floor. Hold a light dumbbell in your free hand.
- Raise your upper arm until it’s parallel to your torso, elbow at your side, and keep it locked there.
- Straighten your arm back until it’s fully extended, pause for a second, then lower only your forearm.
Kickbacks only work if the upper arm stays still. If it swings, the weight is too heavy. This is a finisher, not a strength exercise.
9. Bench Dip
Bench setting: flat, pushed against a wall so it can’t slide.
- Sit on the edge of the bench, hands beside your hips with your fingers pointing forward, and slide your hips off the front.
- Bend your knees to make it easier; straighten your legs (or put your feet on a second bench) to make it harder.
- Lower until your upper arms are roughly parallel to the floor, keeping your back close to the bench, then press up.
Bench dips put the shoulders in an extended position that bothers some people. If you feel it in the front of your shoulders, cut the depth or swap in a close-grip press or push-ups instead.
How to Program Arm Work
For most people, 6 to 12 total hard sets per week for the biceps and for the triceps is a sensible range, split across two sessions. Arms also get worked during rows, pulldowns and presses, so beginners can sit at the lower end.
In a push-pull-legs split like the one I run six days a week, triceps exercises fit at the end of push days and biceps exercises at the end of pull days, so each arm muscle is trained twice a week. If you follow a full-body plan instead, add one biceps and one triceps exercise to the end of each session.
Option 1: Add-On Arm Finishers
| Day | Exercises (sets x reps) |
|---|---|
| Push or upper day | Close-grip dumbbell press 3 x 8-10, then lying triceps extension 2 x 10-12 |
| Pull or upper day | Incline dumbbell curl 3 x 8-12, then spider curl 2 x 10-15 |
Option 2: A Bench-Only Arm Day
| Exercise | Sets x Reps |
|---|---|
| 1. Close-grip dumbbell press | 3 x 8-10 |
| 2. Incline dumbbell curl | 3 x 8-12 |
| 3. Lying triceps extension | 3 x 10-12 |
| 4. Bench preacher curl (or concentration curl) | 3 x 10-12 per arm |
| 5. Seated overhead extension | 2 x 12-15 |
| 6. Spider curl | 2 x 12-15 |
In Option 2, pair a triceps exercise with the biceps exercise after it and alternate between them, resting about 60 seconds after each set. That’s the idea behind alternating sets, and it keeps the session to roughly 40 minutes.
How to Progress
Use double progression. Pick a weight you can lift for the bottom of the rep range with one to three reps left in the tank. Add reps each session, and once every set hits the top of the range with clean form, go up to the next weight. Arm exercises often stall on weight jumps that are small for presses but large for curls, so it’s normal to stay at one weight for a few weeks while the reps climb.
Common Mistakes
- Swinging the weight. If your elbows drift forward on a curl or your hips rock, the shoulders and back are doing the work. Supported curls (spider, preacher, concentration) fix this.
- Cutting the bottom of the rep short. Half reps feel productive but skip the stretched position. Lower all the way under control.
- Going too heavy on extensions. Skull crushers and overhead extensions are hard on the elbows when the weight is too heavy. Use moderate weights and higher reps.
- Doing only curls. The triceps make up more of the upper arm than the biceps. Give them at least as many sets.
- Ignoring bench setup. Check that the adjustment pin is fully seated and the bench doesn’t rock before you sit back on an incline. Push it against a wall for dips.
FAQ
Can you build bigger arms with just a bench and dumbbells?
Yes. Biceps and triceps respond to the same things as any other muscle: enough hard sets, a full range of motion and gradually more reps or weight. Dumbbells and a bench cover stretched, supported and pressing positions for both muscles.
Should I train biceps and triceps on the same day?
Either way works. Pairing them on one day lets you alternate sets and save time. Splitting them, with triceps after pressing and biceps after pulling, spreads the work out. What matters most is the total sets per week and adding reps or weight over time.
Are bench dips bad for your shoulders?
Not for everyone, but they put the shoulder in a deep, extended position that some people find uncomfortable. Keep the depth moderate, stay close to the bench, and swap them out if you feel pain at the front of the shoulder.
Further Reading
- Full-Body Weight Bench Workout: A 3-Day Dumbbell Plan
- The 5 Best Weight Bench Exercises for Chest
- The 5 Best Weight Bench Exercises for Back
- Compound Shoulder Exercises
- Preacher Curls vs Bicep Curls
- Short Head Triceps Exercises
Drafted with AI assistance from my notes and edited by me, Patrick O’Connor.


